K30160NACE Rust Preventing Characteristics Oil Bath

 

Test Method
Used to control corrosion in product pipelines caused by moisture condensed from gasoline and distillate fuels. Anti-rust properties are determined by immersing a polished steel test specimen in a stirred mixture of the sample and distilled water held at constant temperature.

Features and Benefits
• Conforms to NACE TM-01-72, ASTM D665* and D3603* specifications

• Accommodates six sample beakers

• Microprocessor temperature control with digital display and over-temperature protection

 

K30160NACE Rust Preventing Characteristics Oil Bath
Six-place constant temperature bath with stirrers for rust preventing characteristics tests. Stirs sample-water mixtures at 1000rpm and controls temperature with ±0.5°C (±1°F) stability. Immerses test beakers at the proper depth per NACE specifications. Microprocessor temperature control has °C/°F switchable digital setpoint and display. Operator and equipment are protected by an over-temperature control circuit which automatically interrupts power to the unit should bath temperature exceed a programmed cut-off point. Stainless steel stirrer paddles are driven at 1000rpm by an improved pulley drive-roller bearing arrangement. Paddles move to a raised position for placement of sample beakers in the bath. Stainless steel bath includes perforated support shelf for beakers and cover plate. Long lasting polyester drive belt improves reliability. Drive train components are protected by a removable steel guard. All exterior surfaces have stainless steel or chemical resistant polyurethane enamel finishes.

This equipment has been modified for safe operation when testing volatile petroleum products in accordance with NACE Standard Test Method TM-01-72.

*To order this equipment for ASTM and equivalent test methods, please see K30160.

Specifications
Conforms to the specifications of: NACE TM-01-72; ASTM D665*, D6158, D3603*; IP 135; ISO 7120; DIN 51585; FTM 791-4011

Testing Capacity: Six (6) 400mL sample beakers

Maximum Temperature: 104°C (220°F)

Temperature Control Stability: ±0.5°C (±1°F)

Heater Range: 0-1500W

Drive Motor: explosion proof ball bearing type

Bath Medium: 11 gal (41.6L) white technical oil

Included Accessories
Steel Test Specimens (6)
Type 2 Plastic Specimen Holders (6)
Plastic Beaker Covers (6)

Electrical Requirements
115V, 60Hz, Single Phase, 13.0A
220-240V, 50Hz, Single Phase, 6.8A
220-240V, 60Hz, Single Phase, 6.8A

Dimensions lxwxh,in.(cm)
32.75x14 .25x27 (83x36x69)
Net Weight: 79 lbs (35.8kg)

Shipping Information
Shipping Weight: 150 lbs (68kg)
Dimensions: 16.2 Cu. ft.

Ordering Information

 

Catalog
Number

Product Description

Electrical Requirements

K30160NACE

Rust Preventing Characteristics Oil Bath

115V, 60Hz

K30165NACE

Rust Preventing Characteristics Oil Bath

220-240V, 50Hz

K30166NACE

Rust Preventing Characteristics Oil Bath

220-240V, 60Hz

Test Specimens

 

 

Catalog
Number

Product Description

K30110

Steel Test Specimens for ASTM D665/NACE TM-01-72. Machined to ASTM/NACE specifications. Without holder.

K30100

Test Specimen with Type 2 PMMA Holder for ASTM D665/NACE TM-01-72

K30101

Test Specimen with Type 2 PTFE Holder

Accessories

 

Catalog
Number

Product Description

332-002-007

Test Beaker, 400mL, for NACE TM-01-72

250-000-09F

ASTM 9F Thermometer
Range: 20 to 230°F

250-000-09C

ASTM 9C Thermometer
Range: -5 to +110°C

K30130

Chuck for polishing test specimens. Includes locknut and shaft for mounting on accessory drive motor.

K30150

Drive Motor
Drives K30130 Chuck. Mounted on base. 115V 60Hz.

380-100-001

Silicone Carbide Paper, 100 grit
For preliminary grinding and final polishing of test specimens. Pack of 50.

 

When inquiring about NIST traceable certified thermometers, please refer to the catalog number for the corresponding thermometer and replace the middle three zeros in the catalog number with 004. Example: 251-000-01C ASTM 1C Thermometer would be 251-004-01C ASTM 1C Certified Thermometer.

 

 EquiLab