K35100 Corrosiveness & Oxidation Stability Apparatus

 

Test Method
Evaluates the ability of a lubricant to resist oxidation and the formation of corrosive acid compounds by subjecting a sample to accelerated oxidation conditions in a catalytic environment. The sample is maintained at elevated temperature and subjected to a controlled air flow while in the presence of a series of test specimens made of metals commonly found in actual service conditions.

Features and Benefits
• Models for ASTM, Federal and IHC test methods

• Six-sample testing capability

• Solid aluminum block design

• Microprocessor temperature control with digital display and overtemperature protection

 

K35100 Corrosiveness & Oxidation Stability Apparatus
Constant temperature block baths for corrosivity and oxidation stability determinations on hydraulic oils, aircraft turbine lubricants, transmission fluids and other highly refined oils. Insulated aluminum block provides safe, efficient performance at operating temperatures of up to 750°F (399°C). Microprocessor temperature control has °C/°F switchable digital setpoint and display. Operator and equipment are protected by an overtemperature control circuit which automatically interrupts power to the unit should block temperature exceed a programmed cut-off point. Communications software (RS232, etc.), ramp-to-set and other enhanced features are available as extra cost options. Contact your Koehler representative for information. Air flow is controlled at the specified rate by six individually adjustable flowmeters mounted on a common manifold. Includes inlet valve and outlet fitting for condenser water supply and support rack for glassware.

Specifications
Conforms to the specifications of: ASTM D4636, D5968; FTM 791-5307, FTM 791-5308; IHC BT-10; DIN 51394

Capacity: 6 test cells

Temperature Range:125 to 750°F (51.7 to 399°C)

Temperature Control Stability: ±1°F (±0.5°C)

Air Flow Rate:
ASTM D4636/FTM 791-5307: 10L/h
FTM 791-5308: 3L/h and 5L/h (dual range flowmeters)
IHC BT-10: 3L/h (50mL/min.)

Electrical Requirements
220-240V 50/60Hz, Single Phase, 15.9A

Dimensions lxwxh,in.(cm)
32.5x14.5x4.5 (83x37x105)
Net Weight: 271 lbs (122.9kg)

Shipping Information
Shipping Weight: 375 lbs (170.1kg)
Dimensions: 18.5 Cu. ft.

Ordering Information

 

Catalog
Number

Product Description

Model

Electrical Requirements

K35100

Corrosiveness & Oxidation Stability Apparatus

ASTM D4636, D5968 and FTM 791-5307 Model

220-240V 50/60Hz

K35000

Corrosiveness & Oxidation Stability Apparatus

FTM 791-5308 Model

220-240V 50/60Hz

K35300

Corrosiveness & Oxidation Stability Apparatus

IHC BT-10 Model

220-240V 50/60Hz

Accessories

 

Catalog
Number

Product Description

Thermometers

250-000-08F

ASTM 8F Thermometer
Range: 30 to 760°F

250-000-08C

ASTM 8C Thermometer
Range: –2 to +400°C

ASTM D4636, D5968, D6594 and FTM 791-5307

K351-0-1

Sample Tube

K351-0-2

Sample Tube Head

K351-0-3

Air Tube

K351-0-4

Thermocouple Tube

K351-0-5

Condenser, Allihn Type

K351-0-7

Spacer

K351-0-8

PTFE Adapter

K351-0-13

Oil Sampling Tube (for D5968 and FTM 791-5307)

K351-0-14

Specimen Hanger (for D6594)

K293-0-12

Thermocouple, Type J

K29310

Digital Thermometer
Microprocessor based digital thermocouple thermometer with ten-channel input. Monitors Type J thermocouples from sample tubes.

K35090

Test Panel Assembly Fixture
Holds square-shaped metal specimens for tying with cord (for FTM 791-5307 and FTM 791-5308)

K35095

Test Panel Assembly Fixture
Holds square-shaped metal specimens for tying with cord (for ASTM D5968)

FTM 791-5308

K350-0-23

Test Tube

K350-0-24

Air Tube

K350-0-25

Condenser

K35090

Test Panel Assembly Fixture
Holds square-shaped metal specimens for tying with cord.

IHC BT-10

K353-0-1

Test Cell

K353-0-2

Condenser

K353-0-3

Air Tube

K353-0-4

Ring Rod

Washer Shaped Specimens for ASTM D4636 Standard Procedure and for FTM 791-5307

K35110

Bronze

K35120

Mild Steel

K35130

Aluminum Alloy

K35140

Magnesium

K35150

Steel M50

K35160

Silver

K35170

Titanium

Square Shaped Specimens for ASTM D4636 Alternate Procedure and for FTM 791-5308

K35010

Copper

K35020

Mild Carbon Steel

K35030

Aluminum Alloy

K35040

Magnesium Alloy

K35050

Cadmium Plated Steel

K35060

Silver

K35070

Solid Cadmium (non standard)

K35080

Titanium (non standard)

Square Shaped Specimens for ASTM D5968 and D6594

K35010

Copper

K35011

Lead

K35012

Tin

K35013

Phosphor Bronze

Rectangular Shaped Specimens for IHC BT-10

K353-0-5

Aluminum

K353-0-6

Copper

K353-0-7

Steel

K353-0-8

Brass

Polishing Materials

380-150-001

Silicone Carbide Paper, 150-grit.
Pack of 50 sheets.

380-240-001

Silicone Carbide Paper, 240-grit.
Pack of 50 sheets.

380-150-000

Silicone Carbide Grain, 150-grit.
1 lb package.

 

When inquiring about NIST traceable certified thermometers, please refer to the catalog number for the corresponding thermometer and replace the middle three zeros in the catalog number with 004. Example: 251-000-01C ASTM 1C Thermometer would be 251-004-01C ASTM 1C Certified Thermometer.

 

 EquiLab