K33850 Existent Gum Steam Generator

 

Test Method
Gum formed during fuel storage can deposit on induction system surfaces, intake valves, stems and guides. To test for gum content, a 50mL sample is evaporated in an aluminum block bath for a specified period under controlled conditions of temperature and flow of air (aviation and motor gasolines) or steam (aircraft turbine fuel).

Features and Benefits
• For steam-jet method testing of aircraft turbine fuels

• Meets output requirements of three-unit and six-unit evaporation baths

• Electrically heated for clean, efficient operation and ease of installation

• Meets applicable ASME, NEC standards; UL listed, CSA approved

 

K33850 Existent Gum Steam Generator
Electrically heated boiler provides instantaneous and reserve steam capacity for steam-jet evaporation tests. Easy to install and operate; electrical heating eliminates the need for on-site fuel combustion. Requires only a water feed source and electrical hook-up. Ruggedly constructed, with long life industrial grade copper sheath heating element. Includes a full range of safety features: automatic water level control and low water cut-off; steam safety valve; high-limit pressure cut-out with manual reset; steam pressure gauge.

Specifications
Output: 51.2 lbs steam/hr. 212°F

Bhp Rating: 1.73

kW Rating: 17

Dimensions lxwxh,in.(cm)
20x28x36 (51x71x91)
Net Weight: 185 lbs (84kg)

Shipping Information
Shipping Weight: 200 lbs (91kg)
Dimensions: 18 Cu. ft.

Ordering Information

 

Catalog
Number

Product Description

Electrical Requirements

K33850/208601

Steam Boiler

208V 60Hz, Single Phase, 87A

K33850/208603

Steam Boiler

208V 60Hz, Three Phase, 50A

K33850/240601

Steam Boiler

240V 60Hz, Single Phase, 75A

K33850/240603

Steam Boiler

240V 60Hz, Three Phase, 43A

K33850/380503

Steam Boiler

380V 50Hz, Three Phase, 27A

K33850/380603

Steam Boiler

380V 60Hz, Three Phase, 27A

K33850/415503

Steam Boiler

415V 50Hz, Three Phase, 25A

K33850/480503

Steam Boiler

480V 50Hz, Three Phase, 22A

Accessories

 

Catalog
Number

Product Description

K33810

Steam Superheater
Provides dry superheated steam for evaporation baths not equipped with a built-in superheater. Use together with an outside steam source for steam-jet method testing of aircraft turbine fuels. Superheating chamber and condensate trap are constructed entirely of stainless steel. Solid state temperature controller adjusts between 0-550°F. Equipped with steam inlet and outlet connections and condensate drain valve. Steel exterior has a chemical resistant polyurethane enamel finish.
Dimensions 5x27x91/2" (13x70x24cm).
Shipping Weight: 23 lbs (10.4kg)
220-240V 50/60Hz, Single Phase, 6.8A

K33710

Sample Beaker, 100mL spun copper, 50x78mm

332-002-017

Sample Beaker, Pyrex™, 100mL

250-000-03F

ASTM 3F Thermometer
Range: 20 to 760°F

250-000-03C

ASTM 3C Thermometer
Range: –5 to +400°C

 

When inquiring about NIST traceable certified thermometers, please refer to the catalog number for the corresponding thermometer and replace the middle three zeros in the catalog number with 004. Example: 251-000-01C ASTM 1C Thermometer would be 251-004-01C ASTM 1C Certified Thermometer.

 

 EquiLab