|
|
K19200
Water Washout Tester
Rotates a lubricated ASTM ball bearing at 600rpm in a modified
bearing/housing assembly while impinging the bearing with a jet of water at
the specified flow rate and temperature. The tared bearing and bearing
shields are weighed before installation in the bearing housing and again
after testing and drying to determine the amount of sample loss. Consists of
reservoir, bearing housing, circulation system and drive motor. Reservoir is
equipped with cartridge heater, thermoregulator and thermometer port for
accurate temperature control at 100°F and 175°F (38°C and 79°C) per ASTM
specifications. Circulation system includes constant velocity carbon bearing
gear pump, valves and flowmeter directing a controlled water flow to a
capillary (1mm) spray nozzle aimed at the bearing housing. Rugged 1/3hp drive
motor rotates test bearing at 600rpm while driving the circulation pump. A
two-pulley system permits independent pump operation to circulate water while
heating it to test temperature. Mounted on a finished steel base with
locating feet for permanent benchtop placement.
Specifications
Conforms to: ASTM D1264, D4950; IP 215; FTM 791-3252
Drive Motor: 1/3hp 1725rpm
Temperature Control: ±1°F (±0.5°C) sensitivity
Electrical Requirements
115V 60Hz, Single Phase,10.1A
220-240V 50Hz, Single Phase, 5.1A
220-240V 60Hz, Single Phase, 5.1A
Included Accessories
Ball Bearing (2)
Drive Train Guard
Acrylic Reservoir Cover
Outer Bearing Shield
Inner Bearing Shield
Test Bearing
Dimensions lxwxh,in.(cm)
18x12x18.75 (46x30x48)
Net Weight: 67 lbs (30.4kg)
Shipping Information
Shipping Weight: 102 lbs (46.3kg)
Dimensions: 6.7 Cu. ft.
|
