|
|
K12100
Oxidation Stability of Mineral Insulating Oils
Constant temperature oil bath for testing oxidation stability of mineral
insulating oils. Immerses six oil receptacles at the required depth per ASTM
specifications at 110°C ± 0.5°C, and controls oxygen flow to each sample at
the rate of 1L/h ± 0.1L/h through six independent flowmeters mounted on a
common manifold. Insulated double-wall stainless steel bath has
microprocessor temperature control with °C/°F switchable digital setpoint and
display. Operator and equipment are protected by an overtemperature control
circuit which automatically interrupts power to the unit when bath
temperature exceeds a programmed cut-off point. Communications software
(RS232, etc.), ramp-to-set and other enhanced features are available as extra
cost options. Contact your Koehler representative for information. Order
bath thermometer drying tower and catalyst separately.
Specifications
Conforms to the specifications of: ASTM D2440
Capacity: Six samples
Temperature Range: ambient to 260°F (127°C)
Circulator: 1/20hp impeller
Bath Capacity/Medium: 2.5 gal (9.5L) white technical oil
Electrical Requirements
115V 50/60Hz, Single Phase, 8.1A
220-240V 50/60Hz, Single Phase, 4.2A
Included Accessories
Oil Receptacle and Head (6)
Dimensions lxwxh,in.(cm)
14x15x22 (36x38x56)
Net Weight: 31 lbs (14.1kg)
Shipping Information
Shipping Weight: 61 lbs (27.7kg)
Dimensions: 14.4 Cu. ft.
|
